Skip to toolbar
Speedpaint Pens vs The Pile

Speedpaint Pens vs The Pile

Supported by (Turn Off)

Stages of painting Part 2

Tutoring 8
Skill 8
Idea 8
No Comments

With the base colours done I moved on to the metallics.  First up Hoplite Gold (Step 7).  The sword pommels and guards, the musician’s cornu and the signifer’s eagle.

Stages of painting Part 2

8 – Polished Silver.  I didn’t want to completely cover the grey so there would be some deeper tones and the silver would provide a highlight.  Therefore I went for some sketchy strokes across the most prominent parts of the mail and the main surfaces of the helmet, particularly the front and brow rim.  On the swords a highlight was places on the top/front surface, trying not to lose the edge wipeback highlight.

I was most pleased with this step.  The silver is nice and shiny and the highlight approach works very well, despite being limited by the size of the pen tip and high flow rate of the pen.  See what you think:

Stages of painting Part 2

Complete set after the batch stages:

Now to add the shields.  They need a bit of extra work in four simple steps:

1 – Fill in any white areas on the edges of the front with red.

2 – Paint the spines on the front with sand golem, just like the colouring on the Connolly painting.

3 – In Hoplite Gold, using the side of the barrel edge of the tip, edge the shields.  This creates the bronze rim shown by Connolly and covers any unevenness between the front and back colours.

4 – Finally some silver for the boss.

Then stick them on:

Stages of painting Part 2

I’m happy so I repeated the whole painting process for another three spatulas, all in one batch this time.  I finished the whole unit of six bases (24 miniatures) in three sessions of an hour to an hour and a half each.  So a full unit of 24 done in around four hours. I found the three spatulas worth easy enough to batch together so will be able to do four spatulas at a time, getting a whole unit finished with each completed batch by so doing.

For context I’m painting sixteen GW Dryads at the moment,  wet blending Speedpaint with brushes in a more traditional way.  Admittedly the level of detailing is much higher but they took me about twice as long (8 hours) to get the paint on.

So with Speedpaint the traditional way I’m getting one miniature finished in about 30 minutes.  With the pens I’m getting one finished miniature in 10 minutes.  For me the pens are three times faster.  Clearly there is a drop off in finish quality per miniature but for this type of project it is the volume that matters and the finished effect is more from the look of whole units.  Nobody should be looking too closely at any individual model.

Stages of painting Part 2

So that’s on unit done.  Next on to check the basing scheme and see them finished 🙂

Supported by (Turn Off)

Subscribe
Notify of
0 Comments
oldest
newest most voted

Supported by (Turn Off)