Skip to toolbar
Aces High A Blood Red Skies Plog by CommodoreRob

Aces High A Blood Red Skies Plog by CommodoreRob

Supported by (Turn Off)

USS Yorktown

Tutoring 1
Skill 1
Idea 3
No Comments
  1. Although there is a free file for the Yorktown available on line in 1/200 scale , it is designed as a RC model. Whilst in theory perfect, when looking at the file, it needed adjusting to be the correct scale as it was not the correct dimensions for 1/200, and it was in sections and not waterlinrd, so there was too much potential for error.

I then found a cheap stl file that I could scale up which seems to be perfect.

The front half of the Yorktown another 5 sections to print out The front half of the Yorktown another 5 sections to print out
The entire Yorktown printed out in 8 sections.The entire Yorktown printed out in 8 sections.

The model is about 4 foot long. It’s a beast. But as they say “go big or go home”

I have currently glued the parts into 4 sections, my next plan is to acquire a soldering iron to join the parts more robustly before joining them together into a single model.

 

So after so filling and scraping and sanding I have come to the point of joining the two halves of the Yorktown together. As with ball of the sections this consists of using UHU to initially bond the sections together, after that I will use a soldering iron to properly bond each half together.I still have some details to add/refine before priming So after so filling and scraping and sanding I have come to the point of joining the two halves of the Yorktown together. As with ball of the sections this consists of using UHU to initially bond the sections together, after that I will use a soldering iron to properly bond each half together.I still have some details to add/refine before priming

Supported by (Turn Off)

Subscribe
Notify of
0 Comments
oldest
newest most voted

Supported by (Turn Off)