Kings of War A Veteran Wargamer’s Newbie Guide

As wonderful as the Mantic kit for the Abyssal Dwarfs is, there is an issue in that there are no command options beyond some arms for making Darksoul and Decimator leaders (pointing. Standard).

I’d at least like a standard bearer.  Fortunately the kit comes with a hand holding a round object, grenade? Ammunition for the blunderbuss?  Not sure.  Doesn’t matter.  This gives us a hand in a good position to have the fist drilled out and a standard pole inserted.

I had a quick look through the bits boxes and found a few broken Lord of the Rings plastic Uruk-hai pikes.  These were vulnerable to snapping at the hand but that leaves a good length and there is a cruel looking glaive like spear point at the top.  Perfect.

Hands were drilled out with a pin vice and the shaft of what will be the flag pole inserted and secured with a dot of polycement.  Then painting as per the guide in the Part 4 article.  The shaft was painted Noble Skin.

Then on to the flag.  First I needed an image.    If you fancy the old GW Chaos Dwarf flags and icon images they are here.  Mantic have some very clear iconography for the factions with each having a very nice logo like icon.  The one for Abyssal Dwarfs is a skull with tusks.  Perfect.  I took a photo of this from one of the Mantic boxes I had.  The cellophane was still on it but that provided a bit of a ripple-like look to the black background:

These were transferred into Word and duplicated and arranged in pairs ready for printing.

When I printed them this happened:

So not the plain black I had in mind but whatever my printer had been smoking that day had resulted in this lovely faded light to dark green transitioned background.  The colour reminds me of the box colour for the 3rd edition releases, how apt.  That’s right Bob, a “happy accident” indeed!

So not what I had imagined but as it is so much better I’m sticking with it.  Before my printer decided to start behaving again I ran off another full page so I’ve got a whole army’s worth and more now.

On to putting one onto the flag pole.  I use a metal sandwich method.  This requires a tomato paste tube which has been emptied and washed.  Sections can then be cut off and flattened with the side of a pencil on a flat surface.  When absolutely flat trim to a size slightly smaller than one side of the flag.  Leave an allowance for the paper to wrap around the pole too.

To attach:  Spread PVA on both sides of the metal and the inside of the flag.  Position like this:

Wrap the now rather gluey flag around the flag pole.  Position so that the paper edges meet evenly all the way around and there is no over/under lap showing on either side.  The metal is now totally encased inside the paper.

Leave this to dry.

Did you leave it to dry?  Please do.  If you try this final part and the paper is even slightly wet it will tear and you’ll have to start again.

When it is dry you can start to put ripples into the flag.  You can do this with nimble fingers or you can bend the flag against a paintbrush handle holding it first on one side, then the other to get the concertinaing in.  The metal will hold the bends in a nice even way and the paper won’t crease like it does if you don’t have any metal in there.  Once you are happy that the flag looks like it is rippling in the breeze you are done.

Paint the edge to cover up the white.  Pick a colour that matches the top highlight colour on the flag, I used a pale green on the top edge and darkened it a little from about half way down the vertical side.  Use a standard acrylic, not an ink or Speedpaint as this will seep into the paper and stain it.  Get paint on the brush and then wipe a fair amount off and run the side of the bristles along the flag edge.  If you try to paint it on with the tip you will overrun onto the face of the flag which you don’t want.

All that PVA soaked into the paper will make the flag very resilient for play and the metal holds it in the shape you gave it, even if it is bashed or knocked about.

Ta-da!

Hell yes!

You can see the painting method in the Part 4 article.  The assembly is very straightforward so you won’t need to see how to do that.  The only extra I did was drill and paint the barrels of the Decimator’s blunderbusses.

First here is the issue – a very flat muzzle which will be hard to disguise with paint alone.

So to drilling.  I use a pin vice and have a small set of drill bits.  I started with the 0.8mm to drill a pilot hole as close to middle as I could. Then on to a 2.8mm bit which will leave a 1mm rim as long as we got it close to the centre.  The 2.8mm on its own won’t catch into the plastic so easily so to avoid it skating across the surface and you missing the centre the pilot hole is needed.

When the miniature is painted you can paint the inside of the barrel black.  I use a form of Vanta Black called Black 3.0 (that I put in my own dropper bottle), but there are lots of these on the market.  The high matt finish helps deflect light away and tricks the eye into seeing a deep, dark hole where in fact it is only a couple of millimeters.

A Veteran Wargamer’s Journey Into Kings Of War Part 4: Army Assembly – Build, Model, & Paint

I’ve not mass based units before so I’m excited to give it a go.  Now I’ve got my adaptable basing system in place I know I won’t have to paint silly numbers of miniatures and can figure out exactly how many will be in my units.

The main issue will be the core infantry as they will be the largest number and represent the biggest painting task.  I decided to test fit onto my new multibases.  I took one of the card boxes an army had come in (good quality cardstock, thanks Mantic) and cut out bases of the correct sizes for a few different unit types.

Then I assembled some miniatures of each type and started test-fitting them onto the bases.

As you can see from this test with Ratkin I can get 8 onto a single troop base.  I know Mantic want to get 20 into a regiment but their miniatures are quite chunky and have dynamic sculpts that make ranking up a challenge.  There is absolutely no way I’d get 5 in a rank or 10 on a troop base, even on the full size base.  So 8 it is then.  This will be adjusted for bases with scenery elements but there will be at least a couple of core regiments that don’t have that and are just the ranked up troops.

Some of you may wonder why I’ve gone for such a tightly packed formation with neat ranks?  I’m sure we’ve all seen armies in battle report videos with a few miniatures in open formation, loosely scattered across a regiment base.  They look okay don’t they?  You can still recognise what the unit is supposed to be can’t you? My response is that this is a mass-battle, rank and flank game.  I’ll leave it there.

Here are the sizes for the ZABS™ movement trays*:

Standard Infantry

Troop Close Order Tray 100mm x 40mm external, 94mm x 34mm internal (2mm top layer) – 3mm border.

Regiment Close Order Tray 100mm x 80mm external, 94mm x 68mm internal (2mm top layer) – 6mm border on longest side, 3mm border on short side.

Horde Close Order Tray 200mm x 80mm external, 188mm x 68mm internal (2mm top layer) – 6mm border.

Legion Close Order Tray 200mm x 120mm external, 188mm x 102mm (2mm top layer) – 9mm border longest side, 6mm border on the short side.

Cavalry/Heavy Infantry

Troop Close Order Tray 125mm x 50mm external, 119mm x 44mm internal (2mm top layer) – 3mm border.

Regiment Close Order Tray 125mm x 100mm external, 119mm x 88mm internal (2mm top layer) – 6mm border on longest side, 3mm border on short side.

Horde Close Order Tray 250mm x 100mm external, 238mm x 88mm internal (2mm top layer) – 6mm border.

Legion Close Order Tray 250mm x 150mm external, 238mm x 132mm (2mm top layer) – 9mm border longest side, 6mm border on the short side.

Large Infantry

Troop Close Order Tray 120mm x 40mm external, 114mm x 34mm internal (2mm top layer) – 3mm border.

Regiment Close Order Tray 120mm x 80mm external, 114mm x 68mm internal (2mm top layer) -6mm border longest side, 3mm border shortest side.

Monstrous Infantry

Troop Close Order Tray 150mm x 50mm external, 144mm x 44mm internal (2mm top layer) – 3mm border.

Regiment Close Order Tray 150mm x 100mm external, 144mm x 88mm internal (2mm top layer) – 6mm border longest side, 3mm border shortest side.

The internal dimensions of the Troop size tray are the ones you need for the bases you’ll actually put the miniatures on.  So they are:

Infantry – 94mm x 34mm

Heavy Infantry/Cavalry – 119mm x 44mm

Large Infantry – 114mm x 34mm

Monstrous Infantry – 144mm x 44mm

I use a 2mm top layer so these bases are 2mm thick for me.  You have the option of a 3mm top layer and can then use 3mm base thickness if you prefer, just amend the specifications accordingly.

You can find Warbases at https://warbases.co.uk/  Use the contact form https://warbases.co.uk/contact/ or email [email protected] to send a custom order.  State clearly the number and sizes of bases and movement trays required (copy/paste from the details given above).  You can reference this article or my original order reference which was Invoice # 5638.

* Not a real Trade Mark.

I’ve had minis on the table to work through the different phases but tonight we put everything together and played the first full game of Ambush, Ratkin vs Abyssal Dwarfs.

Here are the two armies:

Ratkin won the roll off for sides and initial deployment so will also start the game with the first moves.  Simplified table layout with just two blocking terrain and two rough ground in play.

Initial deployment looked like this.  Ratkin held back the Night Terror until last and then put it on the wide right wing hoping to use its Sp 9 to whip around a flank.  The rest of the force will meet in the middle of the board and grind it out.  The Abyssal Dwarf plan is to advance and overwhelm a unit in melee and then pick off an exposed flank with the victorious unit.

Turn 1 – Ratkin

Ratkin move forward at the double except for one regiment of spears that gets stuck in the uneven terrain.  Ratkin have no shooting.  Turns out they stopped just out of charge range of the LOGs.  Lucky.  I’ll have to watch that in the future.

Turn 1 – Abyssal Dwarfs

Decimators on the left flank have to pivot to face the Night Terror.  Everyone else moves up.  Shooting from Decimators and Throwing Mastiffs plinks a bit of damage.

Turn 2 – Ratkin

Charges go in.  The Warlock issues Plague Pots to Ensnare the opponent of one regiment and a Bane Chant is cast.  Some damage but not much.  De 6+ is tough and De 4+ across the board isn’t a bargain either, even with regiments having 15 attacks.

Turn 2 – Abyssal Dwarfs

All locked in combat now so a Bane Chant is cast and fighting commences.  Damage is building up slowly but all Nerve tests are passed.

Turn 3

Fighting continues but units are getting close to routing now.  Blacksouls manage to beat the unit to their front but the Warlock pulls away and the Ratkin get the spare regiment across to cover.

Turn 4

Somehow the Ratkin fighting the LOGs are getting damage onto them every round and have built up 3 wounds.  They test their Nerve and roll a double 6.  My first rule query.  I’m pretty sure I got it right.  The LOGs are protected by the Iron-caster’s Inspiring so don’t Rout, they just need to take the test again.  However, before that happens a double 6 that doesn’t Rout a unit does D6 additional damage.  Ratkin roll a 1 (Boo!) taking the unit up to 4 wounds.  Ratkin player rolls Nerve test again and gets a 10 and with the 4 Damage already taken Routs the 14+ Nerve LOGs!  That loss blows the middle out of the Abyssal line and to compound the issue the Night Terror finishes off the Decimators. You can see the fateful Nerve rolls behind the Abyssal Dwarf units in the picture.

With only one unit left the Abyssal Dwarfs concede.  For practice it was played out anyway and contrary to the odds the Blacksouls took out the unit in front of them after surviving a flank charge from the Night Terror.  They got got next turn.  The Iron-caster was holding off the other regiment who couldn’t get past his De 5+ but they would have flanked him next turn and a Bane Chant and charging Night Terror would have done for him.

Victory to the Ratkin!

That was a great game.  Initially it looked like the better combat ability of the Abyssal Dwarfs would win through but the LOGs performed poorly against a unit supported by Plague Pots for a couple of rounds.  That gave the Ratkin time to keep chipping damage onto their opponents and a couple of high Nerve test rolls and they win.

It shows that the margins are fine in this game so any mistakes will be painful.  Great fun and I got the win! (And yes, I know I’m playing solo at the moment, shhh, don’t take away my moment of triumph).

The game features blocking terrain that is impossible for units to see around.  Whilst the 2D terrain set has a couple of sections that represent this is is harder to envision on the table than with the other 2D terrain pieces.  Therefore I’ve upgraded the setup with a couple of 3D buildings.  I went for some lovely pre-coloured mdf from Warbases.  I picked these up at Salute along with a few others including a large villa.  I wasn’t planning on making them until after I’d moved but I measured the two mats I needed buildings for and luckily I have two that are a perfect fit:

I know this will meet with Gerry’s approval as he suggested using them for non-historical contexts when they were discussed in a Weekender and the bright colours work very well on this fantasy setup.  They fit within the footprint of the 2D terrain mats and enhance the look of the table no end.

They don’t come with instructions but the build is pretty obvious and they go together easily.  They are able to be taken apart for interior access and ease of storage, the roof of the house comes off and the limes tower breaks down into a number of sections.  Great kits, highly recommended.

A Veteran Wargamer’s Journey Into Kings Of War Part 3: Learning The Game