Stuff what I been painting

I’ve always liked Blood Bowl and still have my 2nd edition boxed version hidden away somewhere. So when GW released an updated version in 2016, I got myself a copy. I had no-one to play with, but that didn’t stop me!

I painted the Orc team up some time ago along with the counters and templates. I’ve also painted a Wood Elf team (all here on this project) but the human team lay languishing in the box, just bare blue plastic. But no more, I got myself some spare minis to make a full team (because GW obviously don’t provide the full 16 players in the box) as well as a lovely ogre to add some punch.

For colour schemes, I went for a mix of my two favourite football teams, Southend United and Brighton (don’t ask). So while it’s not the most original, I like the look.

I had a real challenge with the blue. I was trying out some Scale 75 paint. It’s gel based but I found it very chalky and inconsistent in its coverage. It took several layers to get right but then looked really thick. I did consider stripping them and starting again but just didn’t have the time. These models were also the first time I tried out speed paints, in particular the white. It worked well but I’m not overly sure I’m happy with the final look. What I have learnt is I need to experiment more with both Scale 75 and Speed paints.

And here’s the team photo for the calendar

Which now means, 7 years after getting the boxed game, I’ve painted everything in it. Well done me. Here’s a recent match which the Orcs won 2-0 thanks to some violent actions from their Black Orcs that left a number of the human team needing a good chiropractor.

And now that I have a model tracker, I can update some of them as completed. Eagle eyed readers will spot that the total models in the pile has increased from last time. That’s because I’ve found some more stuff hidden away and I’ve yet to even open two boxes of WHFB models that I have. I also bought some more FoW stuff (German 12cm mortars and 88 Flak and 88 AT guns – I’ll be painting these shortly).

But I’m only 9 models away from breaking even on the pile for this year.

I have a pile of potential that is, like my waistline, only going in one direction – expanding. Like my waistline, I would like it to go in the other direction, so I need to take action. I’ve decided to publicly shame myself on the size of my pile of potential in the hope that this will push me toward reducing it. This is also where the comparison of my pile and my waistline stops – I’m not in any way advocating body shaming here! 🙂

I don’t have a permanent painting station but rather a wheeled painting set of drawers that hides, out of sight, under the stairs. Alongside this, are some boxes that contain unpainted models that are supposed to be painted next. This is just part of the pile of shame and there is more in the garage. But here are some pictures showing what I’m talking about

Now I expect that my pile is not as extensive as others, but it is too big for me. The obvious answer is to actually get a paint brush out and start painting but I decided to procrastinate some more and to catalogue my pile. In this way, I can track progress and see what’s outstanding and hopefully feel a bit more positive about get things completed.

To manage this, I created a spreadsheet because everyone loves a spreadsheet. In it, I have listed all of the models in the pile. By model, I have chosen to make this either an individual model (like a FoW tank) or a base (like a FoW infantry stand). This does create some disparity in the size of effort – for example, one of the entries is a High Elf riding a dragon, which counts as 1 model whereas a FoW German Infantry HQ (2 bases made up of 6 15mm men) counts as 2 models. But it’s start.

I’ve not finished cataloging all of the pile yet as it is buried away in places, this will happen over time so I expect the Pile number will grow, but I’m keen to focus on the Completed number. So, as I progress, I plan to update the spreadsheet and keep a tally of the numbers. Here is the state of play today.

As you can see, a current pile of 405 models. Nothing completed so far in 2023. But I do have 84 models in progress. By progress, I mean undercoated as a minimum. I don’t count models that are built otherwise (as you can see from the pictures above) this number would be much higher! The negative net gain shows that I have bought more models in 2023 than I have painted, which is akin to eating lots of cake and not going on a run (to return to the waistline analogy!)

I’m also hoping to add some nice graphs to my spreadsheet because that will also help get the models painted!

Feel free to drop in here and leave pile shaming comments in this project to spur me on to get the number down!

I’ve had this mdf bridge in my terrain box for ages and thought it was time to give it some colour. Didn’t think it would take too long to paint and I could squeeze it in around work.

It’s not brilliant but looks better than an unpainted mdf bridge.

I’ve also been working on some Blood Bowl stuff and realised that I did not have any painted balls to play with. As they’re so small, this was easy to rectify!

Painting my scenery and terrain is something that I’ve always been meaning to do. It really enhances the in game experience. So as a change of pace, I tackled a couple of terrain pieces.

First up, we have an MDF chateau. I sealed the MDF first with PVA but this was a royal pain in the arse to paint. It took multiple layers, the paint was blotchy, the paint ran and several other irritating things. The upshot is I probably didn’t seal the model well enough. So this took ages to paint to even get it vaguely close to tabletop standard. I eventually got to the point that I’d had enough and it was good enough. Not the most motivating painting experience.

Next up, I 3d printed some tyres as a test print for some Gaslands terrain. The scale was way too big and better for 28mm so I mounted it on some plasticard, added some acrylic paste and painted away. Suffice to say, this was a lot easier to paint than the MDF chateau and cheered me up after the previous frustration. Not sure what I’m going to do with it now that I’ve finished it but I’m sure that I will figure it out.

While I was painting the PaK40 guns in my last update, I found a loader model who looks like he’s not holding regular ammunition. Not quite sure what Hans is holding to load into the gun, but the enemy are likely to get a surprise.

My previous entry here was the initial deployment of my US 1st Armoured Division. The arrival of these new tanks into my Italian forces set up has the defending Germans a little worried and they have called for some additional firepower. So, to plug the gap in the lines, I’ve painted up some PaK 40 Anti Tank guns. The punch on this should easily penetrate the thin armour of the M4A1 Shermans!

These two guns are the Battlefront plastic kit. Easy to put together and reasonably quick to paint. Colour scheme is a simple dunkelgelb with some brown and green airbrushed on to create a camo effect. Chipping is just applied quickly with a sponge and gunmetal. Crew are a standard German Field Grey with a wash. A quick and easy approach.

The bases are polyfila mixed with a brown paint (to avoid the issue of any chips leaving a stark white patch) over which I sprinkle some sand and small cork chips. I pile the polyfila up at the front to create a ‘dug in’ look. The sand bags are home made from greenstuff.

Back to painting 15mm and I’m turning my attention to some tanks. As I like my ww2 Italian campaign (see my other projects!) I’m going to start building up some US forces. In this case, some tanks for the US 1st Armoured Division otherwise known as the Old Ironsides.

This Division was landed at Anzio and spent several months dug in there while the US and British army groups to the South tried to crack Monte Cassino. While they tried to attack out of the beach head, they also had to repel a number of German attacks, most notably from the Herman Goring Division that was across the battle line from them.

During late May 1944, as Monte Cassino finally fell, they did lead the US break out of Anzio.

For my US tanks, I wanted to differentiate them from my British VIII army ones in painting style. My British tanks are muddied and chipped so I’ve opted for a much cleaner look for the US tanks. I’m also going for a dusty look rather than mud – not entirely historical given the heavy rains and mud during the Gothic line fighting but again, something different.

I’m also trying out some enamel paints here for the first time. Everything is base coated using usual acrylics but I’ve then applied an enamel pin wash. I liked this and it was very easy to use despite the smell. So this might become my go to method.

I’ve also used an enamel dust effect. This I found harder to use and get right and I’ve been a little heavy handed in places. I definitely need more practice here.

So rolling off the production line, we have,

2 M4 Sherman 105mm tanks

2 Platoons of 5 M4 Sherman 76mm tanks

1 Platoon of 4 M5 Stuart tanks

Back to painting 15mm and I’m turning my attention to some tanks. As I like my ww2 Italian campaign (see my other projects!) I’m going to start building up some US forces. In this case, some tanks for the US 1st Armoured Division otherwise known as the Old Ironsides.

This Division was landed at Anzio and spent several months dug in there while the US and British army groups to the South tried to crack Monte Cassino. While they tried to attack out of the beach head, they also had to repel a number of German attacks, most notably from the Herman Goring Division that was across the battle line from them.

During late May 1944, as Monte Cassino finally fell, they did lead the US break out of Anzio.

For my US tanks, I wanted to differentiate them from my British VIII army ones in painting style. My British tanks are muddied and chipped so I’ve opted for a much cleaner look for the US tanks. I’m also going for a dusty look rather than mud – not entirely historical given the heavy rains and mud during the Gothic line fighting but again, something different.

I’m also trying out some enamel paints here for the first time. Everything is base coated using usual acrylics but I’ve then applied an enamel pin wash. I liked this and it was very easy to use despite the smell. So this might become my go to method.

I’ve also used an enamel dust effect. This I found harder to use and get right and I’ve been a little heavy handed in places. I definitely need more practice here.

So rolling off the production line, we have,

2 M4 Sherman 105mm tanks

2 Platoons of 5 M4 Sherman 76mm tanks

1 Platoon of 4 M5 Stuart tanks

This is a model that I have had in my collection for years. I base coated them but then stopped as I found it too daunting to take it further. This is a centre piece of an army and I wanted to do it justice, but didn’t have the confidence to take it on. So it went in a box and stayed there.

But you don’t get better if you don’t try. So I gave it a crack and went to work.