Printing a really small ship with the Prusa i3

Supported by (Turn Off)

This topic has 2 replies, 3 voices, and was last updated 8 years ago by basilbrush.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
June 11, 2018 at 7:19 pm #1207087

janus1004
4165xp

1

So I got inspired to see what happened if I took a 28mm .stl file and shrunk a sloop down to 15%… and it is kind of cool. I was surprised how much of the characteristic of the ship that survived the scale-down. It was printed using a 0.05mm layer height.

Have not decided if I will paint it or not, but perhaps… think it would benefit from a mast and sail, and a tiny flag.. 🙂

June 11, 2018 at 11:45 pm #1207211

davehawes
7769xp

0

Makes me think of the classic Man O War game from GW, the scale more than anything makes me think that.

June 12, 2018 at 5:48 am #1207322

basilbrush
554xp

0

was his with the standard 0.4 nozzle? Try again with a 0.2 – makes the world of difference
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.