Is this too good to be true?

Supported by (Turn Off)

Tagged: 3D-printing, Kickstarter

This topic has 4 replies, 5 voices, and was last updated 7 years, 5 months ago by mage.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
April 26, 2019 at 11:27 pm #1383043

petdrb
552xp

0

April 27, 2019 at 7:33 am #1383061

hithero
1267xp

0

No link?

April 27, 2019 at 8:52 pm #1383319

limburger
22634xp

2

I found the link :

https://www.kickstarter.com/projects/ivi3d/ivi-the-closed-loop-3d-printer

*eep* … that does sound good, but they do appear to have found a way to have a lot of control over the position of the printhead.
The CnC bit might be a bit too gimmicky (switching heads to use a different sized tool may be impractical) and the ‘laser’ may not be too practical, but it is nice to have these options.

The one thing ‘missing’ is the feed system for the material … which is something that may break the system.

The low ‘funding level’ is pretty suspect though. OTOH their timeline shows that they only need to make the last hurdle : mass production

At $800 retail it’s not exactly cheap though.
OTOH … their choice to limit the number of backers means that they won’t run into problems if they over fund (a definite problem with many kickstarters).

Because this is a version 1 of their product I’d wait for the next iteration and real world tests by consumers.

April 28, 2019 at 12:27 am #1383344

c0d3monk33
20xp

1

I agree with Limburger. Wait until they achieve the ‘mass production’ hurdle and it’s in the general market with reviews etc. Saying ‘mass production’ is a hurdle is an understatement, it’s the single biggest risk for a consumer product like a 3D printer. If they can’t mass produce a working product for a reasonable cost, it’ll never even make it, let alone survive in the market.

April 29, 2019 at 9:42 am #1383874

mage
20596xp

1

I dont think KS is the same animal it was a few years ago. It will be interesting to see if it can deliver.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.