Should I fill the gap on this?

[mage 20596xp 0]

Hey guys,

 

Im not sure what to do. Should I fill the gap on the back of this awesome throne? And if so, how?

 

View post on imgur.com

 

View post on imgur.com

 

View post on imgur.com

[frostwolf 364xp 3]

If it’s going to stay near a wall, you’ll likely never see it. But you have a couple of options:

 

1) make a scene inside the gap, like bags of coins, scrolls, someone hiding, statuary, etc. or something that’s just a little extra for someone to find since the front of it is so intricate.

2) if you’re going to fill it, I’d likely cut foamcore down to as close a fit as possible but leave a small amount of space before it goes flush with the back. Coat that last bit with putty or greenstuff and then sculpt some rocks, etc. You could build it up with cork rocks or polystyrene foam so it wouldn’t be flat either.

[enginseer 6977xp 0]

^^this ^^

@frostwolf nailed it. I was just going to say cover it with some plasticard, but frostwolf’s suggestion is easier to do and much more dynamic to look at.

[Author]

Posts