Ultracast Greeks from PSC under license from Xyston

Supported by (Turn Off)

Related Companies:

The Plastic Soldier Company

This topic has 10 replies, 7 voices, and was last updated 5 years, 3 months ago by commodorerob.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
May 15, 2021 at 6:44 am #1645917

torros
23841xp

3

You get for £39.95

1 x mounted general
8 x foot command (assorted mix of poses)
72 x hoplites (assorted mix of poses)
6 x cavalry (assorted mix of poses)
12 x peltasts (assorted mix of poses)

Spears are not supplied and in metal the cost would be about £60 direct from Xyston

May 15, 2021 at 2:52 pm #1645970

panzerkaput
34066xp

0

They look good and better than most PSC Ultracast

May 15, 2021 at 3:40 pm #1645979

torros
23841xp

0

Depends on the original sculpts I presume

May 16, 2021 at 3:27 pm #1646202

phaidknott
7261xp

1

Only issue I can see with those is going to be sticking the javelins on. I’ve got these in metal, and I’d (a) be worried about drilling the hands out to accept the javelin (if the material is too soft, it’s hard to drill out small areas like a hind without wrecking it. And (b) finding a “glue” that’s going to stick the ultracast plastic and the wire spear in a small amount (as the inside of the hand are such a small area) reliably as the ultracast has a fair bit of “flex” to it.

Other than that, they look/are lovely sculpts (the amount of sculpts available for the Thacians is INSANE), and there’s a massive range of Greeks and Persians and add into the mix.

But it’s the affixing of the javelins that’s going to be the pain in the butt (it’s hard enough with the metals) 🙁

May 16, 2021 at 5:40 pm #1646242

torros
23841xp

2

@phaidknott Thinking off the top of my head I wonder if you could heat the metal spear and push it through

May 16, 2021 at 7:11 pm #1646244

piers
25498xp

0

Drill a hole and a bit of superglue… job done.

May 16, 2021 at 10:55 pm #1646267

phaidknott
7261xp

0

I’ve tried drilling holes in 20mm plastics to accept wire spears back in the day (nevermind 20mm), I get the impression that the ultracast material is a bit softer and has more flex than the usual 20mm plastics (which mean they are going to be a bugger to drill without the bit and hole trying to “wander” from where you want it to go).

Still I suppose the best thing will be to wait and see how people find it practically (rather than theorising about problems), it may be that it’s a doddle (but it was a task doing it for 120 metal minis).

May 20, 2021 at 5:54 pm #1647773

ninjilly
11673xp

0

They are nice looking sculpts. PSC are increasingly becoming one of the companies I look at first when I’m on the hunt for things. The heated spear thing would be an interesting one to try @torros

May 21, 2021 at 3:51 am #1647874

phaidknott
7261xp

0

Oh don’t get me wrong, the Xyston range is simple THE best range of 15mm ancients put there (although it only serves the Punic Wars very well). The exaggerated relief/detail on the sculpts means the transfer over to the ultracast thermal plastic deal with “shrinkage” very well (meaning you still get VERY detailed plastics with no soft detail).

Now all we have to do is find were to buy the wire spears/javelins. I know Xyston used to sell them back in the day (complete with leaf shaped blades), but I’ve no idea where you can get 15mm ones now (and believe me you DON’T want to start handcrafting your own, that way lies madness….and many a sore thumb and bleeding fingertips)

May 21, 2021 at 9:49 am #1647941

captainventanus
5097xp

0

They do look a lot better than the previous PSC 15mm to date. Thought price difference to metals is slowly but surely closing with this range.

May 23, 2021 at 2:59 pm #1648744

commodorerob
11093xp

1

Apparently there is no issue with the metal spears, they easily push through the ultracast no drilling or heating required.
Author

Posts

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.